Knock sensors on an LS

[DBasher]

I had a scan done on my 05 Silverado after the check engine light came on, it came up as a bad knock sensor...#2 I think. Poking around the Internet it looks like it's one of two under the intake. Besides two new sensors, sealing the plugs with silicone and new manifold gaskets is there anything else I should be doing? Do I need any special tools?

Thanks in advance.

[carkrazy1987]

intake gaskets, knock sensors, most likely the knock sensor harness. then build a dam around the sensors to keep em dry and then ur good. basic tools, and a fuel line quick disconnect tool

[DBasher]

Got it, I'll need to borrow a fuel line tool from someone in the hood it sounds like. So maybe a dumb question but, looking at RockAuto it appears all knock sensors are the same...do I just order a few Delphi sensors and call it a day?

[GregWeld]

[DBasher]

I saw that, didn't watch the entire thing due to motion sickness! If you're going to take the time to make a video why not make a decent one? Some peoples kids....

I'll get the sensors ordered and see how it goes.

Thanks

[Vince@Meanstreets]

"reach out to help someone and they complain your grip is too tight"