Mr.Vengeance's Streetfighter Kit, Fender Flares, Chinspoiler and rear Spoiler FINALLY

[Mr.VENGEANCE]

Thank you very much, Jody!


I know, I know.. Finally!.. Vengeance's Fender Flares are ready to be purchased.. just in time for the Bumblebee clones.. lol.
At least mine are quite tasteful in comparison..


It took a while to get these going mainly from how busy my business is(not car related) but I finally got the molds made and these are ready.
Most of the greybeards on here know I had my flares for about 8 years now but dammit here they are!


The Streetfighter Kit can be bought as a whole kit or in parts.

Fender Flare set
$1600 Carbon
$1000 Fiberglass

Front Chinspoiler $550

and rear Spoiler(not pictured as I havent mounted one yet)

Any part of the kit is offered in Carbon Fiber and Fiberglass.
I wish they could be cheaper for y'all but thats the price for making this in USA.





This pic demonstrated just how far the rears come out from the body.. and I am running 14 inch wide in the rear.

You can see how far they come out of the body.. 4 INCHES in the rear 3.5 INCHES in front.





The fit is very nice... The flares are not even bolted up completely!.. only 2 bolts finger tighted holding it up there and you can see how snug it is to the body!

Ignore the dirty hands, KFC fingerprints all over these.. lol!





The Streetfighter kit Chinspoiler.. in CF or FG

This is with comparison to a stock 67 68 Camaro spoiler..
It has about the same depth but justs out forward about 2 more inches than the regular one and is boxed in.


The stock spoiler has been smushed while on my shelf and looks wider but the Streetfighter chinspoiler is actually about 3 quarter inches wider on the ends to the stock piece..
I am pretty sure the spoiler will fit on an 69 Camaro also as it is the comfortable middle between the two spoilers widths.







Ignore the first and last pic as I pshopped Vengeance's Wheels to sit where they are supposed to be on the edge of the flares.

I have to get a NEW set of wheels for her as I would never use the original wheel maker again.. Transformers tied my hands on running these wheels..

These are manufactured for me by the race team Jim Downing here in Atlanta so you know the quality is nice and no bullshesh.. USA made.. not perfect but very nice.

Also If you have not done bodywork to your 67-68 Camaro or Firebird these will not be crispy flush to the body.. I mocked them up on Stormy(which havent bodyworked at all) and they fit rather well but to have the tight fitment like on Vengeance you need to have that already sorted.. please take this into account before purchase.

All holes will be drilled by you for mounting as all cars are different also know that you will have to cut your fenders behind the flares if you want to drop the car lower behind the fender flares for a more tucked look.

There is a level of commitment to run this look so be aware and responsible as I take no responsibility for the modifications you do to your car..




I know these are not for everyone taste but now the option is there if you want to run this look and run wider tire!

email me at:

[email protected]

Thank you guys very much!

[Efi69Cam]

Off topic... the artwork on your shop wall is incredible!

[Mr.VENGEANCE]

Thank you!

Thats what I do for a living.. Thats my main business other than be interested in playing with cars.

[Ketzer]

The parts look awesome! I like this style and would love to see more of them running around.

[Mr.VENGEANCE]

haaa I'm working on getting the word out!

[no go nova]

Hey where did your mirrors come from?