What are you using for + buss bar power junction? need some ideas please

[ZMAN1969]

What are Y'all using as a main power junction up front when the battery is in trunk? I'm planning on running O gauge cable to one and then send wires to starter, alternator from there looking for suggestions/pics of what you have used for this junction.

[dhutton]

Hi Rich I use these

https://www.ebay.com/itm/Speedway-Mo...ty!76233!US!-1

https://www.ebay.com/itm/Speedway-91...ty!76233!US!-1

https://www.ebay.com/itm/Junction-Bl...UAAOSwUdlWgakd

Edit: fixed first link

Don

[Musclerodz]

AAW 500009. Similar to the middle pic Dhutton posted a link to.

[ZMAN1969]

well maybe I'm not clear those are for going through the firewall - for that I'm going to use a HD grommet, what I'm looking for a a junction where I can connect several leads for starter, alternator fans like a buss bar of sorts
similar to this but with protective cover

[slimjim]

I'm looking at running this one.



for my setup I'm running a 1/0 gauge wire direct from the battery to the starter with the solenoid in the trunk. So it won't go near this terminal.

Then I'll be running a fused(or 80A circuit breaker) 8 gauge wire from the battery to one bolt on this terminal and either an 8 or 4 gauge from the other terminal bolt to the alternator. allowing a bunch of other fused power wires to be connected in-between.

And even though no-one will see it, my OCD will sleep good at night.

[rickpaw]

I'm using one exactly like the one in the ebay link below.

https://www.ebay.com/itm/Jump-Start-...tax4de&vxp=mtr

Has a battery jumper post, plus multiple + connections, and a cover too.