I was sitting here bored in the office and thought I would show you folks another ongoing project here at www.fletcherscustoms.com We got our start long before doing restos and pro-touring cars building badass bagged and body dropped rides (channeled for you old school guys) We have been doing a lot of full frames that allows you to lower the body 3-4 inches, so the rockers layout when aired out. This is a new project we have been working on a few months now. Truck is a 02 Ford F-150, with 2x4 rails under and the cab and dual 1.5" DOM rails outback. Truck has a 4 inch ride height and has been channeled 4 inches from stock. We are still well into the build up of this truck. And till this day we are still trying to figure out what the Ford engineers where smoking when they designed these trucks.
Here is another old project. Truck was my daily driver for over year. Drove home off the dealer lot with 86 miles on it, on the frame table and cutup for a complete air suspension job on 22's
Heres another one that never got completed. This was going to be the shop tow truck. But it eventually got parted out and sold. Truck was a 99 chevy dually with a salvage title, truck had a complete frame with one 22" and 24" cut down Alcoa Semi wheels. One off rear dually fenders and lots of fiberglass work
This was my baby and daily driver for year as you see it. Truck was Sport Truck, and Truckin mg featured truck and one numerous shows across the country. And always was built to be abused. Truck seen over 45K miles in one year traveling. it also had a complete full tube chassis , bumper to bumper, 4 link suspension, air bags, 20/22 wheel combo, custom interior,suicide doors, lots of other trick goodies
heres a few more random things thats been done with us
The truck Chevy never built, 82 Crew Cab short bed!! Full tube chassis, setup for 22/24" wheels. Sitting beside my shop letting nature take its coarse on it!!