My 67 Camaro at Sled Alley - Page 5 - Lateral-g Forums

dhutton · #41 06-17-2021, 03:47 PM

Quote:

Originally Posted by linenoise

I got the gearfx full rear end from detroit speed. bought the debur and break in service. came in and filled it with fluid and of course it leaks. nice. brand new parts leaking right off first fill up no fun. Called them and they sent me the seal, of course the wrong one(pinion instead of carrier itself)

They often leak around the studs. Does it have copper crush washers on the nuts?

Don

**clill** · #42 06-18-2021, 06:37 PM

Sent from my iPhone using Tapatalk

**clill** · #43 06-18-2021, 06:38 PM

Sent from my iPhone using Tapatalk

Jay Hilliard · #44 06-19-2021, 01:02 PM

Quote:

Originally Posted by dhutton

They often leak around the studs. Does it have copper crush washers on the nuts?

Don

Take the four bottom studs out of housing , put red locktite on them and reinstall. They will not seep anymore.

**214Chevy** · #45 06-19-2021, 02:51 PM

Quote:

Originally Posted by Jay Hilliard

Take the four bottom studs out of housing , put red locktite on them and reinstall. They will not seep anymore.

Thanks for the insight Jay. I'll try that before even filling mine with fluid.

**clill** · #46 06-22-2021, 07:37 AM

Matt’s working on trans mount.

Sent from my iPhone using Tapatalk

**clill** · #47 06-22-2021, 07:38 AM

Matt’s working on trans mount.

Sent from my iPhone using Tapatalk

**clill** · #48 06-22-2021, 04:59 PM

Sent from my iPhone using Tapatalk

Jay Hilliard · #49 06-24-2021, 06:25 AM

Superb craftmanship by Matt and team as always.

EVIL SS · #50 06-24-2021, 07:04 AM

The car and project looks great! Any reason why you didn't use the Holley crossmember mount?

Also on your rear frame picture, how wide of a tire are you going to run? Those didn't look like all the parts that come in the DSE tub kit. Looks like you have a little something cooler happening there

Thanks,
Dave