WTB.. single piece of OEM rear window trim.. - Lateral-g Forums

**Steve1968LS2** · #1 02-23-2008, 10:49 AM

I'm going though the stuff that came with the new '68 Camaro. Looks like I got all the trim and duplicates of some of it.

But, I'm missing the lower drivers side trim for the back window (red arrow)..

Looking to buy a piece or trade for some of the extra pieces I have like the two extra rear sides or the extra front side that the arrow it pointing at.

I want OEM since the aftermarket stuff is junk.

Thanks

Mikael A · #2 02-23-2008, 04:53 PM

If I can find it its yours.

ProdigyCustoms · #3 02-23-2008, 11:37 PM

Tha arrow is pointing at a driver front vertical along the window post. But you will have to fit it to see if it fits coupe or convertible is shorter. It looks like a couple.

Yes you have 2 rear sides, you need a drivers lower along the trunk to window filler.

**Steve1968LS2** · #4 02-24-2008, 08:16 AM

Quote:

Originally Posted by ProdigyCustoms

Tha arrow is pointing at a driver front vertical along the window post. But you will have to fit it to see if it fits coupe or convertible is shorter. It looks like a couple.

Yes you have 2 rear sides, you need a drivers lower along the trunk to window filler.

Yea, I know that is a front window side (coupe).. it was just acting as a stand in for the piece I'm missing. The one there is an extra as are the two rear sides.

You have a lower drivers side laying around the shop?

**4mm** · #5 02-24-2008, 06:36 PM

You can email this guy, I have purchased four sets of mouldings from him. He's a straight up kind of guy.

http://cgi.ebay.com/ebaymotors/1967-...spagenameZWDVW