Interior pictures

[GregWeld]

Sweet!

Nice work Tracy!

Mark -- That make ya feel a little better??

[RECOVERY ROOM]

Originally Posted by DFRESH

Mark--congrats bro--you have got to be stoked!! So is the car going to SEMA as planned?

Tracy, i'm suspicious that you have been using the new "Nice Interior Spray" that Rodger has developed on many of these cars. We'll know somethings up if we see you at SEMA and you are three inches taller with dark wavy hair from his "Tall, Dark and Handsome" spray.

Doug

Product tester for "Rear Disc Brake Spray"
Ironworks Inc.

I'm looking in to his " weight loss " spray before SEMA, Might have to order the catalog and become a dealer for the midwest

[RECOVERY ROOM]

I got some P M's about details on console, It is made out of fiberglass and the door is for holding Marks pod phone




This is what it looks like after the pour foam cures and you pull it out of mold, Then just start carving to shape and glass up, sand, skim coat, cover and done

[RECOVERY ROOM]

I'm going to start another thread with some tips and answers to help out some of the home builders. I will go thru and look at some of the basic stuff to do help get your car ready for upholstery. (remember that it takes me awhile to post pics)

[GregWeld]

Tracy --

Do you ever do the wire mesh and then cover with polyester fabric and then resin that? I've seen this done for speaker enclosures etc and it seems pretty efficient.


The console in my Nomad is a combo of MDF - a little steel and some glass and some bondo...





And all done! The face plate of the stereo comes off - and when that is removed - it allows the fiberglass cover to come off and gives me a hidden compartment for "stuff". Once this was finished -- I removed the stereo in the dash and replaced the '55 chevy trim with one that has no cutouts... This was shot still in the mock up stage.

[The WidowMaker]

id love to see the process you guys use. i bought a couple books, but they seem outdated and didnt really have what i was looking for.

THANKS!!!!

[96z28ss]

A tutorial on how you properly install Marquez panels would be great.

[DOOM]

Originally Posted by 96z28ss

A tutorial on how you properly install Marquez panels would be great.

Just send them to Tracy....

[CG3D]

Originally Posted by 96z28ss

A tutorial on how you properly install Marquez panels would be great.

Any help you need, just give me a call - 916-373-9783

Chris

[RECOVERY ROOM]

Chris is right, They know there parts very well. There dash is very user friendly to install,The two piece system makes it easy to service behind it later on. Nice glass work also,..... Greg that console looks good