70 Chevelle Convert Make-Over at CHC

[youthpastor]

We've been so busy at the shop lately that I haven't had time to update what's been happening around the shop.

Here was a project that came in last May. It was an Ebay buy that already featured an LS1 and a few upgrades...but when it showed up it really lacked alot of details.

We ended up tearing into it and installing a new LS3 525 HP crate motor with the 4L70 trans.

[youthpastor]

Upgraded the suspension with Speedtech Components

[youthpastor]

and of course Baer Brakes
6-P with 14" rotors

[youthpastor]

this is Baer's custom color Arizona Copper

[youthpastor]

Forgline was selected for the wheels. This is their diamond cut finish. These wheels are for sale with tires we ended up going a different route

These shipped out Friday http://www.forgeline.com/product_ima...e_image-14.jpghttp://www.forgeline.com/product_ima...e_image-14.jpg

[youthpastor]

and we couldn't power that new LS3 without a strong fuel pump, so Hector was called at Rick's Tanks

[youthpastor]

We ended rewiring the car. Installing Vintage Air front runner and AC unit. Bucket Seats and console.

The column was replaced with a Ididit and classic Instruments has a drop in gauge package.

We really wanted to keep the cowl hood and run a big block air cleaner and I remembered seeing a Mast throttle body adapter to run a Victor Jr

A very trick piece

[youthpastor]

[ChevelleNV]

Originally Posted by youthpastor

That is a nice piece, something you had made or purchased from somewhere?

[youthpastor]

Originally Posted by ChevelleNV

That is a nice piece, something you had made or purchased from somewhere?

Greg that is two pieces from Undercover innovations with hardware from Ring Brothers