The wait is over! Finally, the 18x11 Rocket Attack Wheels are NOW in Stock!

[RocketRacingWheels]

No more waiting...

Our first production of our semi-forged 18x11 Rocket Attack Wheels are now available in almost every part number. Sorry, these pictures are actually of our 18x12. We have been really busy filling back orders.

• Wheel Size and Price : 18x11 - $545.00
• Bolt Patterns Available : 5x4.50 - 5x4.75 - 5x5.00
• Backspacing Available: 5.00" - 6.00" - 6.50" - 7.00"
• Generous caliper clearances for performance brakes
• Four Flat Metallic Custom Powder Coat finishes - Bronze - Flat Black - Gun Metal - RPM7
• Standard Dome Cap included - 1.00" tall included for 3.00" clearance underneath the cap for cars with factory spindles
• Optional: Flush Mount aluminum flat center cap - for those 2.00" clearance underneath the cap for aftermarket brakes.
• Two stock finishes: Full Machined Center & Outer with Titanium Window Accents - Hyper Shot Center with Machined Lip outer

Click below for full list of prices and specification on Rocket Attack Wheels. Pricing starting @ $425.00 each
Attack Full Machined with Titanium Window Accents
http://www.rocketracingwheels.com/ro...-titanium/p678

Attack Hyper Shot Center with Machined Lip Outer
http://www.rocketracingwheels.com/ro...yper-shot/p679

[WSSix]

That's a good looking wheel. Good luck on the sales!

[craig510]

Do you have pictures of the actual wheels with the different backspacing? Hard to get an idea if the size of the lip.

[RocketRacingWheels]

Originally Posted by craig510

Do you have pictures of the actual wheels with the different backspacing? Hard to get an idea if the size of the lip.

Craig, not at this time. We will work on that. We realize because we are making what you would consider to be a custom backspacing into a stock backspacing, we are required to show pics of each where the custom guys do not. I can tell you that our process allows provide similar appearance that you would get from traditional 2-pc custom wheels. We have over 150 part numbers and will try to complete this soon. Thanks for your interest and your patience.

[craig510]

Originally Posted by RocketRacingWheels

Craig, not at this time. We will work on that. We realize because we are making what you would consider to be a custom backspacing into a stock backspacing, we are required to show pics of each where the custom guys do not. I can tell you that our process allows provide similar appearance that you would get from traditional 2-pc custom wheels. We have over 150 part numbers and will try to complete this soon. Thanks for your interest and your patience.

Thanks. I hate the deep / wide lip look from a performance perspective. I like a nearly flat face like late model OEM wheels. With modern spindles we need the high backspace too keep the scrub radius down.