67 Camaro Backspacing Specs

[D Rock]

Hey guys,

These are the final numbers I've came up with. Check them over for me and let me know what you think, anything you would change? I'm ordering ASAP.

18x9 Rear with 5 inch Backspacing(I know I can run more but I want a bigger lip.)

18x8 Front with 5 inch Backspacing

Disc brakes front and rear.

Thanks,

Derek

[awr68]

should work fine on a stock subframe and rear axle width car. What are you buying?

[DriverzInc]

Sounds about right. Normally on the front, a 4.875 works, and in some cases a 4.75 works too. On the 9" rear though, I go with a 5.25" and a 275/40/18. That's what has worked in the past for me on almost every camaro I build wheels for.

[D Rock]

Originally Posted by awr68

should work fine on a stock subframe and rear axle width car. What are you buying?

Budnik Laterals

[D Rock]

Originally Posted by DriverzInc

Sounds about right. Normally on the front, a 4.875 works, and in some cases a 4.75 works too. On the 9" rear though, I go with a 5.25" and a 275/40/18. That's what has worked in the past for me on almost every camaro I build wheels for.

Sounds good, I think i'm going to go with a 5.25 on the rear now just to get a little extra clearance around the lips.

Thanks Jon.