new member w/ project.

[Twin_Turbo]

I wanted to see the pics of roarvette's ride so i had to register and figured I'd introduce myself while I was at it.

I'm Marck from the Netherlands and I'm building a completely modified 1982 Corvette w/ a twin turbo 355SBC (for now, will be a 598 w/ most likely turbos on it), a ZF 6 speed, a clamshell front end, fender flares, custom front & rear suspension, 12pnt cage, wilwood integra 6 & 4 piston calipers, 5 stage dry sump oiling...and a lot more.

Here's some shots of the car, the front & rear susp. are not completely finished. I still have to finish the toe control and upper camber control rods for the rear susp (have everything lying around ready to be final welded), the toe control rods go in front of the halfshafts because of the 80-82 diff. carrier, there's no room on the back. The suspension has full coil overs on all 4 corners, I still have to finish the "spreader" bar on the front and the lwoer control arms (for now it's a stock arm adapted for a lower coil over mount)

My appleton rack will arrive next month or so, that's when I will start on my front steering end take off conversion, no more recirc. ball box for me.

excuse the mess, it's my new shop and haven't had time to do any tidying or arranging stuff (the wood is not for supporting the frame, it's to keep the wheels pointing forward and not scuffing the trailing rods)