Lingenfelter hyd roller cam F/S

[USAZR1]

LPE 74219 hydraulic roller cam,used less than 3K miles,steel billet w/melonized dist gear (no soft bronze gear needed),cam specs are as follows:
intake & exhaust duration: 219 degress at .050 (280 advertised)
lobe separation angle: 112 degrees
gross lift with 1.50 rockers: .525
gross lift with 1.60 rockers: .560
LPE designed this grind to work very well on EFI engines but they also told me they use it alot on carb'd applications w/excellent success.
Email me for a copy of the cam card.
$200 including freight to lower 48