C5 Front/Z28 Rear disk swap parts - Chevelle

[64BeachBum]

I have "collected" all of the parts necessary for Front C5 disks and rear Z28 (95') disks on my 70' Chevelle besides the lines, master cylinder, booster etc. I think I can use a stock style booster, however I am unclear about which master cylinder and distribution block and proportioning valve to use. Also - what diameter lines to use or can I just use the factory stuff. Hopefully someone has done this and has a "recipe" for all the parts needed. Also what length wheel studs should I use front/rear. Any help would be appreciated as always.