1961 Healy build

[silver86]

Originally Posted by CraigMorrison

I'll see if we have done one of these before. Could probably do an ifs front (not MII) and 3-link rear for you..... Because of track width it would more than likely be a manual steer setup though.

I was looking into the AM IFS kit...I am really leaning toward going with the Morrison IFS weld in crossmember kit. I saw that it is listed with a track width of 48 on a 22" os/os frame. The original Track width of my healey is 48.7", I went out and measured my frame, it is 23" from os to os. I dont know if you would have any suggestions as to what direction to take this. I can either try to add 1" in the crossmember or order the one for the 28" frame and narrow it 5".

What would you suggest?
Thanks!