Need help with designing my AN fuel system

[makoshark]

I have a 67 camaro with a mildly built LT1. I am using the stock tank, so no suggestions into running an aftermarket won`t change my mind. I have read and read on this subject and I think I`m more confused now than when before I started researching this. I have a new stock tank, never had gas put in it, and a new fuel sender with 3/8 line and 1/4 line. I also have a new ss 3/8 line to run front to rear of car. I have bought numerous an fittings so far, but don`t have all I need. I bought weld on fittings for the rear of the LT1 fuel rails. I have bought fittings to adapt to the ss hard line. I also bought a 2 liter surge tank. I have an external walbro gsl 392 pump/ 255. What do I do about regulator and where is the optimal place to put it? Research is telling me in the rear. What about return line? I was thinking of making the 1/4 return line on the stock fuel sender as a vent line because research tells me that is too small for a return on my LT1. All help is greatly! greatly! appreciated.
Thanks,
Jeremy