502 BBC/ t-56/ Ron Davis Rad

[Yenkostyle]

I have a baby on the way and trying to get things ready for her so I am selling the motor and trans...

Brand new dyno time only:
BBC GEN VI ZZ502
Pro Systems 950 HP Carb
fully ported angle milled Alum heads
Zero deck block
RPM port matched Eldelbrock air gap intake
Comp Cams 240/248 @ .050 .613 int and .647 ex on 112in @109 hyd roller
Comp Cams Beehive springs
Roller rockers
MSD distributor and wire set
2 inch primaries Hooker super comp 69 Camaro headers
Lakewood bellhousing
McLeod 12 inch kevlar clutch 260873
McLeod pressure plate 360820

604 HP @6100
608 Ft lbs @4400
this was all done in Colorado Springs CO at an altitude of about 6000ft above sea level.

Average between 3700-5500: HP 515.6 TRQ588.8

I’ve spent over $11,000 in this engine.

Will sell for $7000.00
I am located in Colorado Springs and will deliver motor within 500 miles.

T-56 with adaptor plate: for a SBC/BBC bell housing.

Brand new never run you can find out more info here:

http://store.summitracing.com/partde...cmg-1386000011

$2000 firm


Ron Davis BBC Radiator:

Dual fan, shroud, and recovery tank all in one: SOLD SOLD SOLD

Pm me with email and I will send pics if interested...

V/R

Tony