what master to use

[Apogee]

Originally Posted by aany001

how can I tell if its a long push rod style? Is it the rod inside the car or between the master and booster that you are talking about? And thanks for the info thats awesome
Steve

Technically, they're both push-rods, but I was referring to the one between the booster and the MC piston. The boosters with short push-rods are about flush with the master cylinder mounting surface, give or take. The long push-rod units extend outward by a little over an inch and would require a corresponding deep hole in the master cylinder piston, so there's a clear difference between the two.

Tobin
KORE3