1" bore on the master cylinder and 2.5" on the rear claipers. I measured the front caliper piston and it's overall length is 2.125". The booster is an 8".
Is the set up going to work?
What is the equation I can use to check to see what will work?
Last edited by clay69camaro; 09-28-2009 at 03:06 PM.
Reason: added words
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode