90* inverted flare fittings

[WSSix]

I'm having a hard time with locating these parts. they may not even exist honestly. What I am trying to do is have a 90* invetered flare fitting coming out of the ports on my steering box. I can't bend the steel lines tight enough for my liking and I'd prefer to not just use hose as I have to go all the way over to the passenger side of the car. I'd much rather run hardline under the engine.

The downside and ultimately what I think will kill my idea is that the one fitting is 11/16-18 and normal inverted flare for a 3/8 tube is 5/8-18. Anyway, if anyone has some suggestions on a source for the fittings. I would appreciate it. I have tried Earl's, Russel, and McMaster as well as Google.

Or if anyone has a better idea for how I could run my lines at basically a 90* out of the top of the steering box so that I can keep the lines low as I go over to the engine and down under it, that would be great too.

This is all for my 79 TA too

Thanks