64 Chevelle air bags?

[Rob64]

Hey all, forgive me as I searched through some current threads checking to see if I could find my answer and I was not successful. Please also bear with me as I am not as technically advanced as many memebrs I am sure.

I have a 1964 chevelle SS clone with what looks to be the factory suspension - factory spindles, springs sway bars etc on front and chevy 4 link in the rear. I would like to obtain a look similar to what Jeff Skelton has on his 64 seen here: https://lateral-g.net/members/skelton/
(nice ride Jeff!)

Wheels/tires: I am looking at 18x8's in the front and 20x10's in rear

My question is I have been looking over my options for air bags and was wondering if it is possible since I already have a 4 link rear end to simply put air bags in place of the springs that are there now with something like this (front and rear): http://www.opgi.com/product.asp?topc...3065&prodcode=

So in other words... although it would be ideal, is it necessary to replace all bushings, upper/lower control arms, sway bars etc or did Air Ride really make a direct bolt on kit that will essentially achieve the ride height I am looking for without spending $5k and replacing the entire suspension?

I realize it's a somewhat a vague question but if anyone can lead me in the direction it would be appreciated. Thanks