HPI Customs : "Modern" Pro Street 70 Chevelle

[64pontiac]

So here's our latest Chevelle project. Its a bit of a departure from our typical pro touring stuff, but we had to spice it up a bit!

Our customer had already done this car once, and was totally unhappy with the frame he got and never got around to finishing the car. The decision was made to tear it apart and start over, and luckily we got to take it on! Its powdered by a Dart motor, and we are going to be focusing on "street" and not "race" so its getting full interior, full 3.5 inch exhaust, tightly fit cage, and a ton of pro touring style components with a big nast motor.

We are running the billet specialties street lites all around, ssbc brakes, and speedtech front suspension. for the frame we took our chevelle k brace and modified it for teh back half style frame we built. Lemons headers up front, into a custom exhaust we are building from 3.5 inch tubing. Full aeromotive fuel system, CA chassisworks rear suspension which we added a chromoly wishbone and a chromoly anti roll bar too. Fab 9 housing, and the list will grow!

Wait till you see our front motor plate.......

Heres the before:





and our new frame