tko 600 into 69 camaro with small block

[awake1630]

Ok i need a little bit of help here. Got the TKO 600 in the camaro. Used a crossmember from american powertrain. Had to the space the tranny up off the mount about an inch because the crossmember was way to low and pulled the entire motor tranny down. The HEI would not fit. After spacing the the mount up. The HEI went on no problem had alot better fit now.

Took the car for a ride today the crossmember flexs like a SOB. I can watch the tranny move up and down through the shifter tunnel.

when driving the car if i goose it a lil i can here a lil clack. So is there a lot of play in these units? Second It may be the spacers sliding in the mount.

If any of you guys out there have a 69 camaro with TKO 600 in it. Please post some pictures as i can see what crossmember u used. Also i can see your fitment.

Thanks