Recommendations for Hydraulic Clutch kit

[Fluid Power]

Originally Posted by jocko124

Looks like I'm going with the McLeod 1400-30 unit.

Please don't. I had 2 and ended up with a RAM unit. Tons better.

The Mcleod leaked right out of the box....Twice! I will give you the one I just took off if you enjoy that kind of punishment.

Seriously. They are junk.

I used a RAM unit that mounts using the stock bearing retainer. (TKO 600) Straight forward to install. Take a lot of measurements and then shim accordingly.

http://www.ramclutches.com/Products/...se_bearing.htm

Hope this helps. If you have any questions, ask away.

Darren