Budget? Where did it go?

[rusty63ss]

When I started the build of my '63 SS Nova I was going to use my GenI 350 as the foundation. That is what I started collecting parts for. First part I bought T56 from a '97 Camaro. Then I started looking at what it cost to build the 350 into my EFI roller 383 I decided to go to a low milage '04 LS1 instead.

The T56 is complete Flywheel with bolts all the way to the rear u-joint, slave and master with pedals.

So here is my question guys.

Is there a 153 tooth flywheel that will bolt to my LS?
What starter do I need to use?

TIA.
Dhamen