F100 reborn

[Thomo5150]

Setting the cradle height today, the lower frame rails of the Effy need to be trimed. You'll notice the frame profile is not the same from drivers side to passengers side. I wanted to keep the cradle between the rails without notching the effys chassis and losing strength etc..... The tricky bit is measuring the steering arm movement then welding in the rite size tube so the steering arms run thru the rails. Now you can see why I widened the chassis rails the cradle is snug between and it still can be removed from underneath the chassis. More measuring and design tomorrow, the rear frame rails arer sorted I'm waiting for some plate to be bent up these will look pretty trick.........