1966 Chevelle (K..OTIK CRUZER)

[INHEAVEN]

Hey everyone, I originally had my project going on over at pro touring's website and I find that the guys over there just don't really give the feed back and opinions to a modern pro street/ touring car. And I cant seem to find a "pre street forum" other than this one on here. So i'm hoping that if I post my ride and the updates on it, you guys can give some feed back and also post up your rides if theyre similar.

So here it goes, this car has been in our family for over 6 years. When we got it, it had a small block in it and a 4 speed, and I'm sure it was originally a bench seat converted to buckets. Its your average hack job with ****ty wiring to sunpro guages.

It started getting tore down about 2 years ago, we put a new 9" baer's backhalf unit in from our old drag car. Put a big block with a 6 speed behind it as well as air ride on all corners to make it lay right on the ground. And we put in Wilwood disc brakes on all corners as well.













For the motor, we put in a GMPP crate motor with a big Be Cool radiator and dual fans. And a serpentine belt system. I've been debating what I want to do about wanting more power...



All the tub and tin work was done locally in town, i thought it turned out alright, but could be better. I don't let it get to me because I know its not for just show, more go.





I moved my air ride controller from below the dash to where the stereo used to be, I am going to change out those switches for my fan over ride and fuel pump to look more like radio knobs.