Resurrecting Project Triple Threat Trans Am

[Doug1]

I decided to start a new thread to cover the Triple Threat Trans Am build since it has gone through multiple builders and is more or less starting over at this point. The car is a unique project that has had it's twists and turn. Since the 2nd builder was the OP of the build thread, I thought it would be best to start a new thread as the new builder.

For anyone interested the link to the orginal thread is located here...
https://lateral-g.net/forums/showthread.php4?t=27798


To summarize, the car is going to be a full frame 2nd Gen, with power to spare and lots of fabrication. We are going to tie the Art Morrison 5-link rear clip and their front clip together to form a full frame car with a removable body. Every single part of the fabrication will be revisited and revised.

We're 75% or more there in the way of parts acquistions since we have the frame in hand, the motor, the tranmission the rear end and all the body pieces, the front brakes, radiator, fuel cell and pump, Year One fiberglass front end, flares and rear bumper, the Hydyne Motorsports wheel centers are cut and the manufacturer is waiting on backspacing measurements from us to complete.

The big parts we have yet to purchase are a carbon fiber hood and deck lid, seats (long story), rear brakes, master cylinders for clutch and brakes along with the steering column.