Ricks Tank with Vaporworx controller

[snappytravis]

I am about to start on the fuel tank, and controller install on my 69 camaro. I have a plan for routing and connections I would like to through out there and see what everyone thinks, Starting from the fuel pump module.
1. gm quick connect to 3/8 fitting on to the module.
2. an6 3/8 tube nut and sleeve with 37 degree flare attaches to the quick connect.
3. 3/8 stainless tubing bent down over the front of the tank and going towards passengers side attaching to threaded fitting on the tank,
4. an6 male to male union with 1/8 port for fuel pressure fitting,
5. I need help on this one? I am thinking I need a flex hose to attach the union to the fuel line that is mounted on the frame, would like some suggestions.
6. plan to run down passengers side of frame rail, up to firewall then probably another flex hose to engine with y block?
If anyone has a few pics I would like to see them thanks
Travis