Problems with new Ridetech suspension with 3 degrees of positive camber

[Old66Tiger]

I posted in pro-touring but I thought I would post here as well to see if others have had similar issues. My new Ridetech suspension is in and I have 3 degrees of positive camber without any shims. To get back to zero, I will need to put in about 3/4" of shims. The upper arms have about the same dimensions as the stock arms as far as distance from cross shaft to the ball joint stud. The spindle appears to have 3/4" of additional distance from the brake mounting boss to the ball joint stud hole. Anyone else have this or similar problems?