2nd Chance Camaro - Let the Project Begin

[protour73]

Originally Posted by syborg tt

Now on a side note: I received an email from a gentlemen and he warned me that the Moser ends are designed for only straight line use and could fail. Anyone have any thoughts on this ????

Mind you this car is actually being build to be driven with very limited auto-cross.

This quite disturbing as I included the c-clip eliminators to my Moser rear end when I ordered it directly from Moser and told them the car was primarily for street use but occasional track use. The guy NEVER said no, this won't work for you!!

From Moser website in the FAQ section:

Can I use c-clip eliminators for street use?

Answer - We do NOT recommend using C-Clip Eliminators for street use; a C-Clip Eliminator is made for drag race only ( As a safety issue so you do not loose an axle, if it breaks ).C-Clip Eliminators are made for the straight shot down the strip. If you use C-Clip Eliminators on the street the aluminum block will eventually flex from cornering or just going around curves causing the C-Clip Eliminator to leak Rearend fluid.