Master/Booster Advise!

[Apogee]

Originally Posted by WicKeD_SS

Thanks for the advise! Do you know if the wilwood master will fit and work with the 1964-79 9" dual Booster ? and what size bore would be best for baer 6 piston front and rear?

I assume you're referring to the 1968-1976 C3 dual-9" unit? If so, then the Wilwood MC's should be compatible as they have slotted mounting holes compatible with a 3.25" to 3.40" stud spacing and the standard GM mid-size car register diameter. As for bore size, that should be a function of booster size/configuration, vacuum level, effective caliper piston area, pedal ratio and pad compound...however a ballpark bore size should be 15/16" to 1" for your application.

Tobin
KORE3