Yet another 2nd Gen Camaro - Project/update

[FETorino]

Originally Posted by carbuff

It's Dave and Rob you have to watch out for, they will spend an hour crawling around under your car if you don't watch out! Greg just makes fun of things like air cleaners, but you can't really trust his judgement since he's such a big fan of The Salt Lick.

Hey we were nothing but helpful identifying potential safety issues.

Front past experience, it's pretty tough to get a 315 to fit without cutting a wheel well lip and pounding in the seat buckle bump if you have one. Even then, it's still tight, but the panhard will help. We'll stick one up and see what it looks like to you. Maybe next weekend if you can wait that long?

Originally Posted by gerno

I will be changing the rims and most likely going with some CCW LM20's in a 18x10 and 18x 11.5 but I don't know from sure yet. I need to install the passenger front suspension hopefully today then start the measurement process. Jay at Speedtech said I could get ~6" BS. Once I get the measurements I'll post them up. I'm hoping a 295/335 tire combo may fit....

Originally Posted by gerno

I'm finally getting to the point where I need to figure out the actual wheel/tire combo I'm going to run. I have the front fully welded in and all pieces mocked up. With my 275x17 rear wheels on the front there is loads of clearance with the new parts. I'm starting to lean to the 315/275 combo on a 11.5 rim for simplicity and ability to go to a 335 rear later if desired. The biggest debate is wheel choice. The LM20 CCW's seem like the best wheel for what I am looking to do in my price range. Now I'm just debating gold vs grey centers. Here is a rough photoshop of the gold on the car.

Attachment 43360

Steve It looks like you've made a bunch of progress since we hung out at COTA and Blacks BBQ.

Those grey centers look pretty cool.

Originally Posted by gerno

He's what the wheel will most likely look like.

Attachment 42806

How about some pictures of your rear wheels with the 275s mocked up on your front? How much SB do those rims have and how wide are they? If you want a 295 up front can you fit an 18 x 11" wheel? I have a wheel fit tool you could borrow if you want to check out some fitment options.