ABS Is it possible to add?

[Obsin71Ls1]

Originally Posted by chicane

Now there is lies the challenge. But it is possible.....

go on....


Chicane tell me what you think about this

I want to retrofit ABS and ASR into a 70-73 camaro and this is what I have so far

up front, I can use impala/caprice spindles that would allow me to use the hub with a tone ring on it. I would then use sensor from the same car.

Out back I would have a C4 dana 44 IRS already has an intergral tone ring.

For the brains, I would use a Bosch 5.3 EBCM from a 98+ F-body as well as a BCM from the same car. The engine would be a LS1 hence the ASR would be linked to the PCM.


The thing that I am most worried about is the tooth count on the tone rings. The impala ring has about 34 teeth while the C4 has somewhere btw 40-60.
I also don't know how well this would work with the Bosch 5.3. However, I know that the later C4s and impalas ran on Bosch 5.0 which is almost similar.

Do you think I am in dream land here?