Saturday morning...the little woman has a bunch of honey does lined up for me so I had to get those out of the way before I jumped back in on the car. So with those out of the way and half the day gone I was back under the car.
I forgot to mention that before I put the slave in the car I decided to try to pre bled it. I used a wood clamp to keep the bearing from being pushed off and connected it to the quick release. I pumped up the pedal, using a rod to keep it down and bled it out. Not sure if this would work but I had a hard time bleeding the other when I first put it in.
After a while and several verbal assaults the trans was in. Now all I had to do was get it tighted down. mount the cross member shifter, fill with fluid, driveshaft exhaust....blah, blah blah
It is now Saturday night and all is together ready for shake down and break in on Sunday.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode