Malitude 377 twin turbo engine for sale

[camcojb]

Has approximately 100 miles on it since being assembled by Wheel to Wheel. Will be complete from pan to throttle body, including the Electromotive Tec 3 EFI system with coils and W2W custom stainless turbo headers.

Dart block
Callies crank
Oliver billet rods
Pro Topline 23 degree aluminum heads
Crower stainless roller rockers
W2W custom turbo grind cam
Holley Stealth Ram and throttle body
65# injectors
Vintage Air front runner system complete with alternator, ps pump, a/c pump
Powermaster starter
Electromotive Tec 3 system with sensors (you will need a new harness) info here: http://www.electromotive-inc.com/products/tec3.html

Basically you supply the turbos, wastegates, fuel system, and wiring harness $350) and this is a turn key deal. Already tuned.

Cost to build would be app. $20K.without turbos, and about $25K with. Like new, approximately 100 miles on it. I'm going to put my turbo LS2 in the car or else I would keep it. Runs excellent and very strong. Should be in the 800-850 HP range at normal street boost levels with the ability to turn it up for the track.

Option 1: $12,500 complete. Turbos, wastegates, and downpipe not included.The Vintage Air unit and Tec 3 are $4500. alone plus the custom W2W headers are several thousand dollars.

Option 2: $16,000 with turbos, wastegates, and downpipe. The Innovate liquid cooled ball bearing turbos are $2000 each plus $350 each for the wastegates. That would be $17,200 plus the wastegate plumbing if you bought them separate from the engine, so you'll save another $1200. as a package.

Jody