...

Go Back   Lateral-g Forums > Technical Discussions > EFI and Forced Induction
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-31-2014, 10:38 PM
70TWO NOVA's Avatar
70TWO NOVA 70TWO NOVA is offline
Senior Member
 
Join Date: Dec 2006
Location: Peoria, AZ
Posts: 1,083
Thanks: 0
Thanked 0 Times in 0 Posts
Default Marine sbc efi intake?

So I've been scouring the interweb for quite a while for a dual plane MPFI intake for a gen 1 small block chevy (seems like they don't exist for some reason) I plan on converting my carbed 355 in the Nova to a port fuel injection setup using microsquirt to run it. The car s primarily street driven and occasionally autocrossed so I would like to maintain good idle and plenty of low end torque the dual plane intakes provide. I finally came across the intakes made by Mercury Marine called the Mercruiser quicksilver Part #: 8M0061387 (see link below) I'm interested to see if anyone has used these in auto applications and where I may be able to find a used one. I know I can get a new one for about $400 but I prefer to buy used. Any info is greatly appreciated

https://www.perfprotech.com/mercruis.../120?model=947

http://www.pacificp.com/forum/viewto...ghlight=marine
__________________
Brian Miller
-1972 Nova
-1968 Camaro
-1967 C-10 step side 4x4
-2000 Dodge Dakota

it'll buff out........
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net