eGarage 1969 Camaro

[RS-Chris]

One detail we wanted to adjust was the grille opening itself. We wanted a slightly deeper, cleaner look to be incorporated with a waterjet honeycomb mesh.







With the addition of the twin recessed scoops on the hood, we wanted a machined bezel for each opening that picked up on the more aggressive, contemporary details we were adding on the car.





New honeycomb mesh we created for the large opening below the bumper. Fun fact: the lower honeycomb pattern is a slightly different (taller) shape than the vertical grille above. The lower one sits on a 45 angle and the upper is vertical. The taller pattern on the 45 then looks the same as the pattern on the vertical even though both meshes are at different angles.