Accusump Plumbing

[carbuff]

Originally Posted by rickpaw

Found this over at ls1tech.com

http://ls1tech.com/forums/tools-fabr...nder-20-a.html

The guy's using a Harbor Freight drill powered oil pump, and plug the output to the oil filter port, and input to a jug of clean oil.

That was a great suggestion! I have a Harbor Freight about 2 miles from my house, so I ran by there at lunch. I got this:

Drill Powered Pump

Then I ran over to Lowes and picked up some of this:

Clear Vinyl Tube 1" OD 3/4" ID

And with some stainless clamps I have lying around, I now have this to use when I am ready to prime:



In thinking about this, I will just pull the input -10AN line to the external filter mount and attach this clear hose to it. I'll pump through that filter, which will fill the cooler, other filter, and block after. Seems like that should work well, and the oil pump will then only have to prime the internal galley to the thermostat and line that goes to the external filter. Should do that quite quickly...

$35 or so in parts, and I'll probably re-use this when I do an oil change to flush the cooler and re-prime the system.