Way too many bolts with Ridetech Kit

[Erik Beckett]

Is it just me or am I missing something here. I am in the process of installing my front Ridetech Strong Arm Kit along with 12.88" Wilwood brakes on the front of my 68 camaro. I seem to have a way too many bolts in the kit, and the instructions are not the clearest to understand.

The Wilwood kit comes with its own bolts, but then Ridetech supplies a bunch of extra bolts for factory disc brakes, Wilwood or Baer. The Ridetech instructions say to use the counter sinking flat head bolts supplied if you are running wilwood brakes. But my Wilwood caliper bracket does not take the countersunk bolts just a standard bolt for the bottom bolt hole.

Not sure why they would supply all these extra bolts, if knowing that Wilwood supplies all there own bolts with the kit and its a direct bolt on.

Just venting,

Erik