Math question (engine angle)

[waynieZ]

I have a small update but first a question
If I drop my motor mount point down 1/4"-3/8" will this give me any difference in my tranny mount height or will it just carry the same amount I drop to the mount? How many degrees could I gain either way if dropping the same amount if from the engine mount to the trans mount is 44" ? Or is this a crazy question?

Thanks in advance

Here's the reason why I ask.

This is what I have for space under the oil pan to my frame. about 5/8" I'm close to 3.5 - 4 degrees down now.





Here is what I have between my G Force cross member and the transmission mount. (That's a 2x4 on the flat) I could also use more room to keep the 4l85 lower in the tunnel. I need room for a connection on the drivers side.