1971 Firebird Build ("The Other Woman", a.k.a. Project "T.O.W.")

[carbuff]

I see lots of them available in phenolic as well, but this one is listed as wood. Wasn't my first choice, but finding a 3/4" tall spacer is hard... Here is how it's described:

Carb Spacer , wood
Square-bore, 3/4" thick
Open
Single Bolt Pattern

I'll likely pull it back apart and open up the corner radii sometime soon, so I'll see if it has soaked up any fluid. I would hope not with the injectors down in the ports, but I do get some reversion into the intake...