...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-04-2016, 03:30 PM
preston preston is offline
Senior Member
 
Join Date: Nov 2005
Posts: 653
Thanks: 0
Thanked 30 Times in 17 Posts
Default

Yeah my car is a flat bottom front to rear with a diffuser.

I did have to create a cutout to account for droop of the 3rd member, and I also have a cutout for the bellhousing which drops about 1.5" below the "ground plane".

That makes it better than nothing but having those holes probably reduces the benefit quite a bit.

In my case the floor is the flat bottom, and then I just have dzused on panels front and rear. The panels are alumalite which doesn't make the best material for a splitter but it works great for these kinds of panels.

If you design the car right its actually pretty easy to do this, they key is getting the exhaust out in the rockers so you're not trying to encapsulate it.

If one was serious about tracking the car you would want to extend the flat floor out beyond the rockers anyway but that's just having fun at that point.

I don't know what good its ever done me except to encapsulate oil leaks ha ha.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net