eBay LS Swap Headers - Test fit on a 67 Camaro

[n77nxc]

I've been on the hunt for a set of headers to replace the Dynatech LT's I have on my 67. The Dynatechs hang extremely low, and I cringe every time I scrape them on something.

I ordered a set of eBay shorty headers awhile back based on a recommendation from a member here. I had my doubts about the fitment/quality, but for the price ~$175, it was worth a shot. After roughly 6 months, I finally decided to take the time and see if they would work.

I'm not here to argue about Chinese vs. American but purely to inform others about the fitment. They fit like a glove with my setup. I searched high and low to see pics of these installed on a 1st gen Camaro and turned up nothing. So here goes:





I only took pics of the driver side since most header issues involve clearance with the steering box. I have set back brackets on my car and if the engine was pushed forward, there could potentially be interference with the steering box.

Next up is to fab the downpipes. I'll post more pics once I get the downpipes installed.