'67 w/DSE & 275x18 help

[califconstruct]

.



I just ordered and received a set of Forgelines.
I have a stock subframe, Detroit speed arms, coil overs.
I did trim down the inner lip about half of the thickness that it had.

I ordered the 9" x 18" wheel. Which is actually a 10 inch wide wheel as
Forgeline measures on the inside lip. Backspacing was at 6 3/8 inch.
Mounted up Falken Azenis RT615. . 265 x 35 x 18. I expect the tire to rub a bit on the inner fender and restrict the turning radius a bit but overall fitment was dead on.
This measurement was taken from a friends car that has the same set up backset and tire size.



.🤓