FAST 92mm intake installation questions

[72Z/28]

Hi guys

I have a FAST 92 mm intake manifold that I need to install in my LS6 68 camaro. Currently I have the professional products LS intake and need to replace it with the FAST intake.

The existing plumbing set is as follows:

-the vacuum hose from the aeromotive FPR is connected to the canister purge fitting located at front of intake on the driver side.

-The brake booster at the back of the Professional products intake is plugged because I have manual brake set up.

-PVC hose also connected into the intake at the front.

The FAST intake, on the other hand has got the following ports:

Back of the intake:
-small vacuum nipple
-MAP connection
-Brake booster nipple

Front of the intake:
-PVC nipple
-Canister purge fitting

So since I have manual brakes I assume I can plug the brake booster nipple.

my question is should I connect the small bacuum hose coming from the FPR to the cansiter purge fitting (similar to what I have on the Prfessional products intake) and plug the small vacuum nipple at the back of the FAST intake or it should the other way around ( plugging the canister purge fitting and using the small vacuum nipple for the connection of the vacuum hose on the FPR).

Will appreciate your input guys.