1994 Cheyenne (Super) project truck

[GrannyNova]

Decided to just notch the frame for the Z28's accessory bracket to save on costs and time.
Later I will box the frame back in.

It is notched to fit the 1LE pulley plus with the Z28 power steering pump one of the lines will reach the truck steering box and the other is about 8 inches to short so to reach i'll get a new line made plus I'll need to make a bracket for the reservoir.

And here is the clutch pedal bracket support brace I made out of some flat steel from the part store and just made a z out of it to hold the bracket up and solid.

Also turn the engine over yesterday so now it just a matter of time before it's running and running down 4.6 Mustangs.