Rough Idle When Cold?

[Brewtal66]

Originally Posted by mitch_04

Hope it works for you. Visually, they aren't like the older gaskets which are usually an obvious blowout. The section will just be a little flatter and may have a slight discoloration. I've replaced oodles of them and rarely is it an obvious leak. Our smoke machine makes it an easy find, otherwise they can be very difficult to diagnose.

It's been almost two weeks and hasn't done any of the rough idling. I'm fairly certain it was those gaskets.

I don't have a smoke machine, but it was only $17 bucks for gaskets and a little over an hours work, so I rolled the dice. It would have been nice to use a smoke machine just to know for sure that was the issue though.

Now I'm thinking my truck(2000 5.3L) might need a new set as well. Sometimes it studders a bit when first starting up.