Use the promo code "ALWAYS" to get $101 off.... no idea when this sale will end... but this block is cast from a better grade aluminum, also rotocast (shaken to get rid of bubbles... therefor denser), billet main caps, piston squirters, 13mm head bolts (All other LS are 12mm). This can be run wet sump or dry sump. They are normally around $3700-3800! Of note- You can't run a stroker crank with the stock piston squirters; however you can if you install the Katech squirters if you go that route. ($80/each)
I just bought one for my Chevelle to build up a bigger turbo motor.... That GTS76 turbo (1200hp rating) will like .9 more liters for faster spool (vs. the current 5.3).
https://www.summitracing.com/parts/n...0aAs9mEALw_wcB
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9's@150mph goal
https://lateral-g.net/forums/showthread.php4?t=52976
1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's,
2850lbs
10.31@137mph 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
New LS9 blocks from Summit $1808 delivered
Threaded Mode