1969 Speedtech Equipped Pro Touring Camaro

[garickman]

Been working on my 1969 Camaro in my two car garage for several years now. I bought this Camaro in Kansas about 5 years ago. Even though it was from Kansas this was one of the most rust free 1st Gen Camaro's I have ever seen. It had belonged to the same family since 1975 and it truly was kept in a barn.

With that being said, I have replaced nearly every panel on the car. It has a new full one piece floor pan, full trunk floor, both full quarter panels, custom firewall, new roof skin, tail panel, drop offs and rockers.

The reason everything needed to be replaced was so cool, I couldn't be to upset about it. As the owner described, "it was the early 80's, we lived on an 800 acre ranch with a natural creek running through it, a 1969 Camaro wasn't worth ****, me and my two brothers were teen agers and the Dukes of Hazard was the best show on TV"

I have dozens upon dozens of pictures of the tear down, and the bracing of the body on a jig replacing the panels, rust proofing etc. But we've all seen those type of pictures hundreds of time. I thought I would show some pics of some of the cooler things that were done. First was the process of how I got the perfect fitting rear spolier.

Fitting the rear spoiler Step One:

First, get yourself a friend who is a badass metal fabricator and have him make you a rear spoiler with the same shape and dimensions as the stock spoiler. Don't forget to notch the center.