mild corner car

[deuce_454]

id say that if you are any good at fabricating you can get prety far, gulstrand is free and reversible.. so do it! also if you have access to a lathe there is no reason not to do delrin or even better aluminum/teflon bushings... also solid frame mounts are a good and cheap upgrade if you can do it yourself.. id also minitub it just to fit some wider rears, i mean if you are buying new rims anyway, the difference isnt that much.. also boxing the stock controll arms are a cheap and very advisable modification. id buy some sway bars and a quicker steering box.. possibly on ebay


with regards to brakes my suggestion on a budget is to fit brakes from a 98 up f-body, can be had cheaply on ebay.. you need to do some brackets up front, and clock them in the rear.. but again not impossible by far